technologic systems logo
search icon
Customer Area | Contact Us |cart icon
  16525 East Laser Drive
Fountain Hills, AZ 85268
Phone (480) 837-5200
Fax (480) 837-5300
info@embeddedARM.com
Results 1 to 3 of 3
  1. #1

    change the TS4800 to mode RW

    Hi
    I have an TS-4800 with protecction shutoff, and I can't install some .deb (pygame) The version of linux it has is Linux kernel 2.6.35. How can I change to read-write mode?

    Thanks

  2. #2
    Hello

    I suspect you're still in the initrd. If you type 'exit' through the serial console it will boot to Debian which will be read/write. You can also relink the linuxrc to boot to Debian automatically. You can find more about this behavior in our manual:
    http://wiki.embeddedarm.com/wiki/TS-...x_.2F_Fastboot

  3. #3
    hello

    I wan't be able to connect by the serial port I use telnet, In the serial port I was able to watch some lines at boot, but I can't send something , do you know the configuration of the com1 (console)?

Similar Threads

  1. TS7800 TxEn disable or change pin
    By khalberg in forum TS Boards (Temporary)
    Replies: 1
    Last Post: July 12th, 2012, 05:14 PM
  2. How to return fastboot mode in TS-7520-BOX?
    By zhongjr in forum TS Boards (Temporary)
    Replies: 2
    Last Post: June 14th, 2012, 05:17 PM
  3. Problem about sleep mode
    By Danielchai in forum Atmel AT91SAM9G20 Series Support
    Replies: 5
    Last Post: June 9th, 2012, 12:33 AM
  4. Problem about sleep mode
    By Danielchai in forum TS Boards (Temporary)
    Replies: 5
    Last Post: June 9th, 2012, 12:33 AM
  5. change the TS4800 to mode RW
    By lugemex in forum TS Boards (Temporary)
    Replies: 2
    Last Post: May 2nd, 2012, 06:32 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •